Lumber Pickup & Delivery Across the Twin Cities
Pickup and delivery are available through partner suppliers in our network. Tell us where the wood is, or where it needs to go, and the supplier who follows up can confirm what they can arrange.
Arranged Through Partner Suppliers
Lumber Minneapolis is a referral service, so we do not move lumber ourselves. Pickup and delivery are handled by the partner supplier you deal with.
Mention It in Your Request
Say in your quote request whether you need delivery, or want used lumber picked up. Include your location and what the site is like.
A Supplier Follows Up
We pass your request to partner suppliers. The supplier who follows up can say what they can arrange for your load.
Details Come From the Supplier
Timing, vehicles, and any charges are set by the supplier and confirmed with your quote. We do not run trucks or set rates.
Agree Before the Day
Confirm where the wood is going, who will be there, and how it will be unloaded, so there are no surprises on site.
What Moving Lumber Involves
Lumber is long, heavy, and awkward to handle. The right approach depends on what you are moving, so a clear description of your load makes for a more useful answer.
Small Residential Orders
A few boards or a single mantel can often fit in a pickup truck or a small trailer. Ask whether collecting it yourself is an option.
Job-Site Loads
Larger orders commonly travel on a flatbed, which makes long boards easier to load and unload. Mention how the wood will come off the truck.
Heavy Beams and Timbers
Large timbers can be far heavier than they look. Tell the supplier the size and species, and ask what equipment is needed to move them safely.
Finished or Dried Material
Kiln-dried flooring and finished pieces need protection from rain and road spray. Ask how the load will be covered.
Serving Minneapolis-St. Paul and the Twin Cities Metro
We take requests from Minneapolis, St. Paul, and suburbs across the metro, including Bloomington, Plymouth, Edina, Eagan, Maple Grove, and Woodbury. Availability depends on partner suppliers, so include your location when you send a request.
If you are further out in nearby Minnesota, send your location and we will pass it on. Distance, load size, and access all affect what a supplier can arrange.
Loading & Unloading: What to Think About
Every supplier works a little differently, but a safe delivery or pickup comes down to the same few things.
Share Access Details Early
If there are gates, construction staging, or specific entry points, mention them when you talk to the supplier.
Check the Spot
Look at the placement area for overhead power lines, soft ground, slopes, and clearance. Pick a second spot in case the first does not work.
Think About Soft Ground
Lawns and mud can be damaged by heavy equipment. Solid surfaces such as concrete, asphalt, and gravel are much easier.
Be Careful With Heavy Pieces
Large beams can be dangerous to move by hand. If anything is being lifted into place, have a qualified professional plan the lift.
Stack It Properly
Stack lumber flat with stickers between layers for air circulation, and keep it off the ground. Cover it if rain is expected, leaving room for air to move.
How Lumber Is Protected in Transit
Reclaimed lumber is hard to replace if it gets damaged. These are the common ways loads are protected, and it is fair to ask a supplier which they use.
Strapping
Lumber loads are commonly secured with steel or polyester strapping to stop them shifting in transit, with boards stacked flat.
Best for: Rough lumber, dimensional stock, framing material
Corner Protectors
Protectors placed at strap points help prevent edge damage from strap pressure, which matters on milled and surfaced boards.
Best for: S4S lumber, flooring, finished boards
Wrapping
Plastic wrap or tarps protect material from rain and road spray. This matters for kiln-dried wood, which can take up moisture again.
Best for: Kiln-dried stock, flooring, milled material
Blanket Wrap
Moving blankets and padding protect surfaces that straps alone would mark.
Best for: Mantels, tables, and finished pieces
Crating
Wooden crates protect fragile or high-value pieces, particularly if they are moved by freight.
Best for: Fragile pieces and one-of-a-kind items
What to Confirm With Your Supplier
Date and Time
Ask when delivery can happen, and how you will know it is on the way.
Placement
Confirm whether the driver unloads at the curb or can reach a specific spot on your property.
Unloading
Ask who unloads, and whether you need people or equipment on site.
Protection
Ask how the load is strapped and covered, especially for dried or finished wood.
Charges
Ask whether delivery is included in your quote, and what could change the cost.
Return Pickup
If you also have used lumber to sell, ask whether it can be collected at the same time.
Hauling Lumber Yourself
We have no yard to collect from, but some partner suppliers may let you collect your order. Ask the supplier who follows up. If they can, these tips will help.
What to Bring
Bring a truck or trailer with enough capacity for your order, plus straps or tie-downs. Heavy gloves are worth having with old lumber.
Check Your Weight
Dense hardwoods add up quickly. Oak runs around 4 lbs per board foot, so work out your load before you set off, and check it against your vehicle's payload rating.
Secure and Flag Your Load
Distribute the weight evenly and strap the load down firmly. Flag any lumber that overhangs your vehicle, and check Minnesota rules for overhanging loads before you drive.
Preparing Your Site for Delivery
A little preparation helps a delivery go smoothly. Exact requirements depend on the vehicle, so confirm them with your supplier.
Access Width
Measure your driveway, alley, or access road, and note any tight turns. Delivery trucks need more room than a car.
Ground Conditions
Solid, level surfaces such as concrete, asphalt, and compacted gravel are best. Soft ground can stop a truck or a forklift.
Overhead Clearance
Check for low power lines, tree branches, and structures above the delivery path and the placement area. If lines are present, contact your utility in advance.
Placement Location
Choose a flat, level area close to where the material will be used. A covered spot such as a garage is ideal for weather protection.
Weight Limits
Loaded trucks are heavy. Make sure your driveway can take the weight, and flag new concrete, septic tanks, and underground utilities before delivery.
Someone On-Site
Have someone present to direct placement and check the order. If no one can be there, leave clear written instructions and agree on a drop location in advance.
Delivery Pricing Is by Quote
We do not set delivery rates. Any cost for pickup or delivery comes from the partner supplier, usually based on distance, load size and weight, and any special equipment needed. Ask for it to be included in your quote.
Frequently Asked Questions About Pickup and Delivery
Who delivers the lumber?
A partner supplier. Lumber Minneapolis is a referral service with no trucks or drivers. Pickup and delivery are arranged through partner suppliers, directly between you and them.
How much does delivery cost?
We do not set delivery rates. Any delivery cost comes from the partner supplier as part of your quote. It usually depends on distance, load size, and access.
How soon can lumber be delivered?
That depends on the supplier and the material. If you are working to a deadline, put the date in your request, and confirm it with the supplier before you schedule other work around it.
Can a truck reach a house with a narrow driveway?
It depends on the vehicle and the site. Measure the width of your driveway, look for tight turns and low branches, and describe them when you send your request.
Do I need to be present for delivery?
It is a good idea. Someone on site can confirm where the wood should go and check it on arrival. If you cannot be there, agree on a drop location with the supplier in advance.
Can long timbers and beams be delivered?
Ask. Give the length and weight, or the species and dimensions, so the supplier can work out what is needed. Long or heavy pieces may need special vehicles or machinery to unload.
What happens if there is bad weather on delivery day?
Ask the supplier how they handle it. Ice and heavy snow can make driveways and job sites unsafe, and rain matters most for dried or finished wood. Plan somewhere dry to put the load.
Can used lumber be picked up from my property?
Possibly. Send a selling request describing the wood and the access. A partner supplier who is interested in the material can say whether they can pick it up.
What areas are covered?
We take requests from the Twin Cities metro. Availability depends on partner suppliers, and nearby Minnesota locations are worth asking about.
Why Local Lumber Makes Sense
Heavy materials cost fuel to move, so the distance wood travels matters. Reusing lumber close to where it came from keeps that distance down, and reusing a beam avoids cutting and milling a new one.
Local wood has less far to travel
Ask whether a drop-off and pickup can share a trip
Requests from the Twin Cities metro
Need Lumber Moved? Start With a Quote Request
Tell us what you need and where. We pass your request to partner suppliers, and a partner supplier follows up.